Important: Ideally, the bales should be placed on pallets, to avoid any moisture to get into them from below.
Make sure when stacking the bales that you have an angle of minimum 45°.
1. Cover the stack with TISSUBEL® as soon as possible after construction.
2. Due to its practical folding, TISSUBEL® is very easy to install. Place your TISSUBEL® on top of the stack.
- Place your TISSUBEL® on top of the stack. Make sure you have the sewing line in the middle. Lower both sides of the TISSUBEL® on either side of the stack (Figure A)
- Now pull the TISSUBEL® in the length of the stack. The TISSUBEL® was comes in an accordion fold which makes it very easy to open it on the stack. (Figure B)
3. Finally apply weights (silage bags) on both sides using the Fixation Kit. Use about pieces of 5 ft. per weight. Place weights every 6ft. (Figure C)
